Original Cannondale carbon fiber seatpost for 2015+ Slice Multisport bike.
Kit contains seatpost and saddle clamp hardware.
Will not fit 2009-2014 Slice Aero bikes.
Original rear brake adapter for Cannondale Synapse Disc. Works with 140mm rotors. Fits 2014-2017 models for Shimano brake calipers.
Kit includes brake adapter, two bolts, and two washers.
This small rubber wedge will keep all kinds of muck and grime out of the seatpost clamp area on your new Synapse Carbon while still allowing access for seat height adjustment
Original alloy Cannondale chainstay protector for SuperX carbon cyclocross bikes.
Self adhesive tape sticks in place behind the chainrings to prevent damage if the chain sucks into the chainstay.
If you need to convert a Lefty or Headshok frame to use a standard 1.5"-1/8" tapered fork, this is the headset you need. This is for Si frames that take the Headshok headset bearing straight into the frame without the use of cups. Frames that are like this include the...
Original alloy Cannondale chainstay protector for 2011+ Jekyll mountain bikes.
Self adhesive tape sticks in place behind the chainrings to prevent damage if the chain sucks into the chainstay
Complete replacement headset for CAAD 10 series frames and tapered forks. A dirty, worn, or damaged headset can make for a scary ride! Get the original Cannondale CAAD 10 headset and get your steering back under control. We advise regular inspection and cleaning of headset bearings, especially on the carbon-cupped...
Original Cannondale Flash Carbon chainstay protector. Protect your frame and chain with this Cannondale Chainstay guard set.
Kit includes one self adhesive alloy guard. Designed specifically for Cannondale Flash Carbon 26" and 29'er models.
Original Cannondale shock mount hardware for all RZ 120, RZ 140, and Rize models, both carbon and aluminum. It is critical to keep these bolts tight, and if yours are starting to get loose, bent, or rounded out, it is time to replace them. Kit includes two bolt and nut...
Original Cannondale shock mount hardware for all RZ 120, RZ 140, and Rize models, both carbon and aluminum. It is critical to keep these bolts tight, and if yours are starting to get loose, bent, or rounded out, it is time to replace them. Kit includes two bolt and nut...
Cannondale Integrated Headset - Adapts Headshok Headsets to use with 1 1/8" Fork - KP058 If you are trying to convert a Lefty or Headshok frame to use a standard 1 1/8" fork, this may be what you need. There are a couple different kinds. This is for frames that...
Cannondale Lefty 2.0 Hybrid 32 100mm Fork Guard Short KH145.Â
Replacement guard with Cable tie mount to secure front brake hose. (Cable tie not included)
Original Cannondale Moto Guard for Lefty 2.0 36mm forks - specifically Lefty Olaf for Fat CAAD and SuperMax 140mm forks. Protect your Lefty lower leg and manage the front brake hose!
Kit includes moto guard, three mounting bolts, and one zip tie.
The Cannondale SuperMax Lefty comes on the Trigger 29'er uses a unique steerer. Each frame size has a different length headtube and steerer. Also it uses a standard 1.5" stem and not the standard Headshock/Lefty stems.
The Lefty Hybrid 32 Moto Guard protects the inner tube surface from damage. It also supports the brake line. Check it periodically. Make sure it is in good condition and attached properly.
Complete replacement headset for many of Cannondale's 1 1/8" threadless SI frames and forks over the years. A dirty, worn, or damaged headset can make for a scary ride! Get an original Cannondale headset and get your steering back under control. Includes the following required items: Upper and lower 1...
Original Cannondale headset for 2018 generation Synapse carbon frames. This headset fits frame sizes 56cm, 58cm, and 61cm. Use kit K35018 for 44 and 48cm frames. Use kit K35028 for 51 and 54cm frames. Use kit K35038 for 56, 58, and 61cm frames. Headset includes: Carbon conical spacer Flat alloy...
